Turbocharger HT12-19B 14411-9S001

Introduction of Turbocharger HT12-19B 14411-9S001

  An engine produces power by burning fuel in an air cylinder, the amount of fuel input is limited by the amount of air drawn into the cylinder, and the power produced will also be limited. If the engine’s operating performance has been in the best condition, and then increasing the output power only by compressing more air into the cylinder increasing the power of combustion. In the current technical conditions, turbocharger is the only mechanical device that can increase the output power of the engine at the same working efficiency.

More Turbocharger HT12-19B 14411-9S001 model as follows：

 Turbocharger HT12-19B 14411-9S001、Turbocharger HT12-19B 14411-9S002、Turbocharger HT12-19B 14411-9S000

Model	Part Number	product picture
HT12-19B	14411-9S001
HT12-19B	14411-9S002
HT12-19B	14411-9S000

Turbocharger HT12-19B 14411-9S001 Specifications

1.High Quality & Factory Price

2.Safe packaging and fast delivery

3.Advanced testing equipments

4.Perfect Follow-up Service

Working Principle：

 Turbocharger HT12-19B 14411-9S001 uses the exhaust emissions of a certain pressure from the engine to impulse the rotation of the turbine wheel and drive the high-speed rotation of the coaxial compressor wheel which brings the compressed fresh air into the engine cylinder the enhance the air charge of the cylinder so as to inject more fuel into the cylinder which increases the power of the engine.

Maintenance method of turbocharger：

1. Use high-quality fully synthetic oil with good fluidity, good viscosity-temperature characteristics and low coking rate to ensure that the oil can provide good lubrication to the turbocharger at any time;

2. Use a high-quality air filter to ensure that the air entering the engine is well filtered and the intake pipe is well sealed. Larger particles cannot pass through the supercharger, so as to prevent hard particles from hitting the supercharger impeller. , resulting in damage to the impeller of the supercharger and damage to the dynamic balance. In addition, it is not allowed to start the engine without an air filter at any time

3. The turbocharged engine should run at idle speed for one minute after cold start and then run at high speed, and after high-speed driving, it should run at idle speed for two minutes before turning off the engine, which can ensure good lubrication and heat dissipation of the turbocharger.

Why to choose us?

（1）We have our own factory. The good quality and the competitive is the advantage of our company.

（2） The material we choose is always the K418 one and products always come out with high quality.

(3) A trial order or sample orders are welcomed.

(4)Our products are exported to Europe,America, Japan, and other countries and regions in the world.

(5) We will do our best to service you all the time if you have the further question.

Packaging & Delivery

Our certificate

FENGCHENG HONGBO TURBO CO,.LTD