Turbocharger RHF4 8971195670

Introduction of Turbocharger RHF4 8971195670

  The turbocharger is the only mechanical device in the existing technology that can increase the "output power" of the engine under the condition of "operating efficiency unchanged". Turbochargers are generally installed on the exhaust side of the engine. Turbocharging technology is to use a special compressor to compress the gas in advance before entering the cylinder, increase the density of the gas entering the cylinder, and reduce the volume of the gas. In this way, the mass of the gas per unit volume is greatly increased. More fuel can be injected into the limited cylinder volume for combustion, so as to achieve the purpose of improving engine power.

Turbocharger RHF4 8971195670 Product parameter

Turbocharger RHF4 8971195670 Specifications

1.High Quality & Factory Price

2.Safe packaging and fast delivery

3.Advanced testing equipments

4.Perfect Follow-up Service

Working Principle：

 Turbocharger RHF4 8971195670 uses the exhaust emissions of a certain pressure from the engine to impulse the rotation of the turbine wheel and drive the high-speed rotation of the coaxial compressor wheel which brings the compressed fresh air into the engine cylinder the enhance the air charge of the cylinder so as to inject more fuel into the cylinder which increases the power of the engine.

Maintenance method of turbocharger：

1. Use high-quality fully synthetic oil with good fluidity, good viscosity-temperature characteristics and low coking rate to ensure that the oil can provide good lubrication to the turbocharger at any time;

2. Use a high-quality air filter to ensure that the air entering the engine is well filtered and the intake pipe is well sealed. Larger particles cannot pass through the supercharger, so as to prevent hard particles from hitting the supercharger impeller. , resulting in damage to the impeller of the supercharger and damage to the dynamic balance. In addition, it is not allowed to start the engine without an air filter at any time;

3. The turbocharged engine should run at idle speed for one minute after cold start and then run at high speed, and after high-speed driving, it should run at idle speed for two minutes before turning off the engine, which can ensure good lubrication and heat dissipation of the turbocharger.

Packaging & Delivery

Our Service

1.We provide 12 months quality warranty for all the range of our turbo parts.

2. In process of confirm the failure of turbo parts, we will need customers assist us to find out the reason of problem. We will need some pictures and VCR provide to our turbo engineer.

3. We will not responsible on the turbocharger failure that lack of oil or the oil not pure when turbo installation.The turbocharger is very sensitive, we advise our customers choose the professional garage to install it.

FAQ

Q1. What is your terms of packing?

A: Generally, we pack our goods in neutral white boxes and brown cartons. If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters. 

Q2. What is your terms of payment?

A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance. 

Q3. What is your terms of delivery?

A: EXW, FOB, CFR, CIF, DDU. 

Q4. How about your delivery time?

A: Generally, it will take 30 to 60 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order. 

Q5. Can you produce according to the samples?

A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures. 

FENGCHENG HONGBO TURBO CO,.LTD